Tooling available from Advanced Grinding Supplies Ltd including Diamond & Synthetic Dressing Tools, Face Drivers and Precision Live and Dead Centres in Carbide or Tool Steel

We stock a range of dressing tools to fit the standard Morse Taper adaptor on Studer Grinding Machines.
Our wide range and stock levels usually mean that we have a dressing tool to suit your needs but on the occasions where you need something special to get the job done then we can work with you to design and manufacture a dressing tool specifically to meet your needs.

Natural Diamond Chisel Type Dressing Tool with Studer Short MT1 Shank

Our standard Chisel type dressing tools mounted on a short Morse Taper 1 shank to fit Studer Cylindrical Grinding Machines come with a 0.50 carat High Quality Natural Diamond, with a 55 degree chisel angle.
The most common and stocked lapped radius sizes are 0.125mm, 0.250mm or 0.500mm.

With the short MT1 shank they will fit straight into the Studer standard dressing tool holders.

These tools are serviceable and we also offer a full re-lap service.

 

Cone Type Dressing Tool with Studer Short MT1 Shank

Studer type Cone dressing tool with extraction thread. We have a range of standard stocked Cone type dressing tools with a short MT1 shank to fit into Studer Cylindrical Grinding Machines. We use high quality 1/4, 1/2 or 3/4 carat Natural, Long Diamonds with a 60 or 68 degree Cone point. Our standard tools come with 0.125mm, 0.250mm, 0.500mm or 1.25mm radius mounted on short MT1 shank with extraction thread to fit straight onto your Studer machine.

These tools are serviceable and we offer a full re-lap service. We can also make these tools using diamond carat sizes if required.

 

1 CVD Log Blade Type Dressing Tool with Studer Short MT1 Shank

CVD (Chemical Vapour Deposit) log Blade type dressing tool. This dressing tool has a single larger CVD log set on centre of a Blade and has either a 0.125mm or 0.250mm lapped radius. We stock standard tools mounted on a short MT1 shank to fit straight into the standard Studer dressing tool holders

These tools are serviceable and we offer a full re-lap service.

 

3 CVD Log Blade Type Dressing Tool with Studer Short MT1 Shank

CVD (Chemical Vapour Deposit) log Blade type dressing tool. Studer type 3 CVD (Chemical Vapour Deposit) log blade dressing tool has a 10mm wide Fliese blade with 3 CVD logs 0.8mm x 0.8mm x 5mm equi-spaced and positioned on centre with either a flat face or a 0.10mm or 0.25mm lapped radius. We stock standard tools mounted on a short MT1 shank to fit straight into the standard Studer dressing tool holders

These tools are serviceable and we offer a full re-lap service.

 

Needle / Grain Fliese Blade Type Dressing Tool with Studer Short MT1 Shank

Our Studer type Fliese blade (Fliesen Blade) dressing tools can come with either high quality natural diamond needles or natural diamond grains and standard tools have either 10mm or 20mm wide Fliese Blade with 10mm or 15mm depth of diamond mesh. We have standard tools either Centre Mounted or Offset Side Mounted to suit your requirements.

We keep a stock of various types and sizes but we can also manufacture this style of tool to suit individual requirements.

Our standard tools are mounted on a short MT1 shank to fit straight onto your Studer cylindrical grinding machine.

 

---